NO PAINT or UNDERCOATING on repairs or replacement parts before inspection.

This will be a complete safety and structural inspection on your vehicle.

Front and Rear glass must be free of chips and cracks. Windshield wipers must be in good working order.

The Airbag (SRS) and ABS and/or traction control lights, MUST SELF CHECK. If equipped, in most vehicles, these lights will come on and stay on for a few seconds and then go out (Self Check). If the lights do not come on at all OR if they come on and stay on, the vehicle will not pass.

Per most manufacture guidelines a Creased/broken/damaged Headliner due to curtain airbag deployment must be Replaced. You can NOT repair a headliner with side curtain Airbags.

The tires on the vehicle must be in good shape. Any gouges or cuts will fail. The cords of the tire can not be showing and the wear on the tires cannot be down to the wear indicators.

Horn, all lights, and turn signals must be in good working order.

Replacement parts can be NEW or USED. However, all USED parts must have the donor VIN listed on the receipt.

Repairs can not be done with sheet metal screws or rivets unless used from the factory. Body filler must be used to a minimum, a thin coat is all that's permitted. Shims are not acceptable between hinges and mounting surfaces (ie. "A" & "B" Pillar at Door Hinges). Hinges must mount flush.

All interior door handles must work properly.

All mirrors must be on the vehicle .